Tel: +86-536-7532102
Home > News > Content
Categories
Add: No.529 Minzhu Street, Hanting District, Weifang City, Shandong, China
Tel: +86-536-7532102
Fax: +86-536-7532186
Mob: +8618678061528
Contacts: Lucas
Email: cpelucas@chinayaxing.com

How To Choose Good Quality And The Use Of Good Effect Of ADC Blowing Agents?

Weifang Yaxing Chemical Co.,Ltd | Updated: Oct 23, 2017

How to choose good quality and the use of good effect of ADC Blowing Agents?
ADC Blowing Agents - Gels that play a huge role in life, used primarily for filling and bonding. So how to choose good quality and use the effect of good ADC Blowing Agents? ADC Blowing Agents is
It is suitable for the sealing and waterproofing between steel doors and windows and walls, Let's take a look at the three factors that ADC Blowing Agents need to consider:
1, first of all to fully understand the type of ADC Blowing Agents
Because different types of ADC Blowing Agents have different foaming forces, foam stability is not the same, so the use of the process there are some limitations.
2, but also earnestly learn to master the technical indicators of ADC Blowing Agents
Measuring the quality of ADC Blowing Agents indicators of good or bad foam, foam toughness, bleeding and so on. Foaming force reflects the foam liquid blistering ability, can be used to bubble height and expansion ratio to represent,
The higher the bubbling height, the greater the expansion ratio, indicating that the greater the bubbling force of ADC Blowing Agents.
3, and finally to a comprehensive understanding of the use of ADC Blowing Agents
ADC Blowing Agents of the Bifurcation ADC Blowing Agents and Tube Blowing Agents. Tubular ADC Blowing Agents, that is, what we usually call a one-time, mainly for retail, suitable for the amount of home plugging leaks is not the place. Tube-type ADC Blowing Agents than the gun-type ADC Blowing Agents of the pressure is small, sometimes playing dirty, prone to bet the valve can not hit the phenomenon, in addition, the tube-shaped products to fight out the plastic bubble no gun-style delicate , The expansion force is relatively large. The cost of the gun-type ADC Blowing Agents is lower than that of the tube.
The uncured foam has a strong tackiness on the skin and clothing, and do not touch the skin and clothing when using it. It is best to wear uniforms during construction. If you get on your clothes, it will be difficult to clean your clothes. And once exposed to the skin, to immediately rinse with plenty of water; if sprayed to the eyes, rinse with water and quickly go to the hospital for medical treatment.
First, while uncured with a lot of water to clean
The uncured foam has a strong tackiness on the skin and clothing, and do not touch the skin and clothing when using it. It is best to wear uniforms during construction. If you get on your clothes, it will be difficult to clean your clothes. And once exposed to the skin, to immediately rinse with plenty of water; if sprayed to the eyes, rinse with water and quickly go to the hospital for medical treatment.
Second, with the market monopoly of the ADC Blowing Agents cleaning agent
Conventional washing method can not be washed away, must be washed with a professional cleaning agent, building materials on the market there are specialized cleaning ADC Blowing Agents cleaning agent.
1: the ADC Blowing Agents, before curing can be "foam cleaning agent" or alcohol or acetone for cleaning, because the foam cleaning agent has a strong solubility, it is recommended to spray it on the rag, and then wiping light Lightly wipe the ADC Blowing Agents; the cured foam can only be removed by mechanical means (sanding or cutting). After using ADC Blowing Agents After using ADC Blowing Agents, remove the gun and immediately tighten the cleaning agent on the gun;
Open the gun rear flow control valve, pull the trigger so that the gun can be fully cleaned inside;
3. After the gun has finished cleaning, close the flow control valve and remove the gun;
Third, try acetone to clean
Acetone, like ADC Blowing Agents, is organic, with the same polarity, and achieves results according to similar dissolution principles. Some people say that gasoline is also feasible, the same principle, you may wish to try.
Four, with a blade to remove
After the ADC Blowing Agents has dried, remove the removed parts with a blade or cut or scrap. If it is stained on the clothes, then put the clothes under the sun sun exposure for several days, a few days after the hand rub will be good. ADC Blowing Agents will slowly change color and pulverize under strong ultraviolet light. But ADC Blowing Agents will still leave the clothes stains.